All MIBs › ADVA-FSPR7-MIB › scFarEndSigDegThres
scFarEndSigDegThres
Module: ADVA-FSPR7-MIB
OID (symbolic): ADVA-FSPR7-MIB::scFarEndSigDegThres
OID (numeric): 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.40
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description:
Far End Signal Degrade Threshold
What is scFarEndSigDegThres?
Reports an integer value representing the signal degrade threshold level at the far-end port in dBm units. This threshold is used to generate alarms when far-end signal quality drops below acceptable levels, ensuring proactive fault detection. An example value might be -25 indicating the signal must remain above -25 dBm to avoid degradation alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.40 snmpwalk -v2c -c public <target> ADVA-FSPR7-MIB::scFarEndSigDegThres
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.40.1 snmpget -v2c -c public <target> ADVA-FSPR7-MIB::scFarEndSigDegThres.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> scFarEndSigDegThres.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.11 | fspR7 | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.11.7 | advaFspR7 | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3 | management | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5 | dcnMgmt | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5.3 | scTable | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5.3.1 | scEntry | ADVA-FSPR7-MIB |
| 1.3.6.1.4.1.2544.1.11.7.3.5.3.1.40 | scFarEndSigDegThres | ADVA-FSPR7-MIB |