All MIBs › ADSLATUR-MIB › adslAturFTPOperCode
adslAturFTPOperCode
Module: ADSLATUR-MIB
OID (symbolic): ADSLATUR-MIB::adslAturFTPOperCode
OID (numeric): 1.3.6.1.4.1.4900.1.2.2.4.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The FTP operation code. When Manager set this var to firmwareUpgrade(1), the RTU will begin to upgrade firmware. Other values, say, throughputTest(2) and dataBackup(3) are not supported yet.
What is adslAturFTPOperCode?
This value specifies which FTP operation the device should perform: firmware upgrade, throughput testing, or data backup. You set it to 1 for firmware upgrades, though testing and backup modes are defined but not yet supported. It tells the device what action to take over FTP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4900.1.2.2.4.7 snmpwalk -v2c -c public <target> ADSLATUR-MIB::adslAturFTPOperCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4900.1.2.2.4.7.1 snmpget -v2c -c public <target> ADSLATUR-MIB::adslAturFTPOperCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4900.1.2.2.4.7.1 i <value>
Start monitoring Conexant-chipset ADSL CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSLATUR-MIB::adslAturFTPOperCode OID value, configure state conditions and alerts, and monitor any Conexant-chipset ADSL CPE modems from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4900.1.2.2 | adslAtur | ADSLATUR-MIB |
| 1.3.6.1.4.1.4900.1.2.2.4 | adslAturFirmwareUpgrade | ADSLATUR-MIB |
| 1.3.6.1.4.1.4900.1.2.2.4.7 | adslAturFTPOperCode | ADSLATUR-MIB |