All MIBs › ACTIDATA-MIB › sensor1Type
sensor1Type
Module: ACTIDATA-MIB
OID (symbolic): ACTIDATA-MIB::sensor1Type
OID (numeric): 1.3.6.1.4.1.37758.1.10.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Sensor type
What is sensor1Type?
Identifies what type of physical sensor is connected: none, temperature, humidity, or dry contact. This tells monitoring software how to interpret the raw reading and what thresholds or alerts apply to that sensor type. A value of 1 indicates a temperature sensor, so readings are in degrees; a value of 2 means humidity readings as a percentage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.37758.1.10.1.4 snmpwalk -v2c -c public <target> ACTIDATA-MIB::sensor1Type
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.37758.1.10.1.4.1 snmpget -v2c -c public <target> ACTIDATA-MIB::sensor1Type.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> sensor1Type.1
Start monitoring Actidata tape backup/storage units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACTIDATA-MIB::sensor1Type OID value, configure state conditions and alerts, and monitor any Actidata tape backup/storage units from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.37758 | actidata | ACTIDATA-MIB |
| 1.3.6.1.4.1.37758.1 | consumerProducts | ACTIDATA-MIB |
| 1.3.6.1.4.1.37758.1.10 | nv1Sensortable | ACTIDATA-MIB |
| 1.3.6.1.4.1.37758.1.10.1 | nv1SensortableEntry | ACTIDATA-MIB |
| 1.3.6.1.4.1.37758.1.10.1.4 | sensor1Type | ACTIDATA-MIB |