ACMIB :: upgradeSwErrorStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBupgradeSwErrorStatus

upgradeSwErrorStatus

Module: ACMIB

OID (symbolic): ACMIB::upgradeSwErrorStatus

OID (numeric): 1.3.6.1.4.1.1751.2.18.16.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The result of the finish of the ftp software upgrade download. Set to a value 3-22 if upgradeSwCopyStatus is doneWithError. Set to none if upgradeSwCopyStatus is doneSuccessfully. Set to userAbort if upgradeSwCopyStatus is aborted.

What is upgradeSwErrorStatus?

This read-only OID contains error codes (3-22) when a software upgrade fails, or 'none' if the upgrade succeeded. Network engineers check this OID after an upgrade attempt fails to determine the root cause and whether to retry or take corrective action. A value of '15' indicates a specific failure condition; 'none' means the upgrade downloaded without errors.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.16.14
snmpwalk -v2c -c public <target> ACMIB::upgradeSwErrorStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.16.14.1
snmpget -v2c -c public <target> ACMIB::upgradeSwErrorStatus.1

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::upgradeSwErrorStatus OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.16sysControlACMIB
1.3.6.1.4.1.1751.2.18.16.14upgradeSwErrorStatusACMIB