All MIBs › ACMIB › twoWireSinkSignalingBits
twoWireSinkSignalingBits
Module: ACMIB
OID (symbolic): ACMIB::twoWireSinkSignalingBits
OID (numeric): 1.3.6.1.4.1.1751.2.18.2.10.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This field selects the signaling bits as seen in DS1 signal, ab or abcd.
What is twoWireSinkSignalingBits?
This OID reports which signaling bits are currently present in the DS1 (T1/E1) signal, typically either 2-bit (ab) or 4-bit (abcd) format depending on the line protocol. Network engineers need to know this to verify that the correct signaling protocol is configured for voice calls and to debug call setup failures. For example, if the OID shows 'abcd', it means the device is using the full 4-bit signaling pattern, which is required for modern ISDN PRI circuits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.10.1.5 snmpwalk -v2c -c public <target> ACMIB::twoWireSinkSignalingBits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.10.1.5.1 snmpget -v2c -c public <target> ACMIB::twoWireSinkSignalingBits.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::twoWireSinkSignalingBits OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2 | equipConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.10 | twoWireSinkPortConfigTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.10.1 | twoWireSinkPortConfigEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.10.1.5 | twoWireSinkSignalingBits | ACMIB |