All MIBs › ACMIB › tasTstLineIntfIndex
tasTstLineIntfIndex
Module: ACMIB
OID (symbolic): ACMIB::tasTstLineIntfIndex
OID (numeric): 1.3.6.1.4.1.1751.2.18.25.44
Node type: OBJECT-TYPE
Type: IntfIndex
Access: read-write
Description: Interface index in SSPPCCC format of CE card on which this test is to be initiated.
What is tasTstLineIntfIndex?
This OID specifies the card location (in SSPPCCC format) where the line test will be initiated and performed. Engineers use this to target the test to the correct communication card that is physically connected to the line being tested. A value of "0105002" directs the test to run on Shelf 01, Slot 05, Port 00, subunit 2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.25.44 snmpwalk -v2c -c public <target> ACMIB::tasTstLineIntfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.25.44.1 snmpget -v2c -c public <target> ACMIB::tasTstLineIntfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.25.44.1 s <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::tasTstLineIntfIndex OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.25 | toneAnnceControl | ACMIB |
| 1.3.6.1.4.1.1751.2.18.25.44 | tasTstLineIntfIndex | ACMIB |