All MIBs › ACMIB › tasTstLineId
tasTstLineId
Module: ACMIB
OID (symbolic): ACMIB::tasTstLineId
OID (numeric): 1.3.6.1.4.1.1751.2.18.25.43
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Test ID to be started for line testing.
What is tasTstLineId?
This OID specifies which line test (identified by its test ID number) to execute on the communication line to verify its health. Network engineers use this to run diagnostics on phone lines to check for noise, echo, transmission quality, and other performance issues. A test ID of 105 might run a "loop-back test" on the selected line to verify bidirectional transmission.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.25.43 snmpwalk -v2c -c public <target> ACMIB::tasTstLineId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.25.43.1 snmpget -v2c -c public <target> ACMIB::tasTstLineId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.25.43.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::tasTstLineId OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.25 | toneAnnceControl | ACMIB |
| 1.3.6.1.4.1.1751.2.18.25.43 | tasTstLineId | ACMIB |