All MIBs › ACMIB › tasTstLineAction
tasTstLineAction
Module: ACMIB
OID (symbolic): ACMIB::tasTstLineAction
OID (numeric): 1.3.6.1.4.1.1751.2.18.25.45
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Test action to be performed.
What is tasTstLineAction?
This OID specifies what test operation to perform (start, stop, abort, continue, etc.) on the communication line being diagnosed. Administrators use this to control diagnostic test execution without physically accessing the equipment. A value of 1 might mean "start the test" while a value of 2 might mean "stop the test".
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.25.45 snmpwalk -v2c -c public <target> ACMIB::tasTstLineAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.25.45.1 snmpget -v2c -c public <target> ACMIB::tasTstLineAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.25.45.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::tasTstLineAction OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.25 | toneAnnceControl | ACMIB |
| 1.3.6.1.4.1.1751.2.18.25.45 | tasTstLineAction | ACMIB |