All MIBs › ACMIB › siteRemoteMgrAddr3
siteRemoteMgrAddr3
Module: ACMIB
OID (symbolic): ACMIB::siteRemoteMgrAddr3
OID (numeric): 1.3.6.1.4.1.1751.2.18.1.10
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: remote manager IP Address, where TRAP will be sent to.
What is siteRemoteMgrAddr3?
This OID specifies a third trap destination for additional redundancy across geographically separated monitoring locations (read-write). Organizations with disaster recovery requirements use this to ensure alerts reach distant facilities. Setting it to 192.168.100.10 at a remote datacenter guarantees notification delivery even during regional outages.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.10 snmpwalk -v2c -c public <target> ACMIB::siteRemoteMgrAddr3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.10.1 snmpget -v2c -c public <target> ACMIB::siteRemoteMgrAddr3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.1.10.1 a <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::siteRemoteMgrAddr3 OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1 | sysConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1.10 | siteRemoteMgrAddr3 | ACMIB |