All MIBs › ACMIB › siteEtherIpAddr
siteEtherIpAddr
Module: ACMIB
OID (symbolic): ACMIB::siteEtherIpAddr
OID (numeric): 1.3.6.1.4.1.1751.2.18.1.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: ip address for ethernet access to the site (switch)
What is siteEtherIpAddr?
This OID stores the IP address used for reaching this site over ethernet networks, and you can change it via write access. You configure this address so SNMP polling, management traffic, and remote connections can find this device on the network. Setting it to 192.168.100.50 means that is the address your monitoring station queries for metrics.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.3 snmpwalk -v2c -c public <target> ACMIB::siteEtherIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.3.1 snmpget -v2c -c public <target> ACMIB::siteEtherIpAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.1.3.1 a <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::siteEtherIpAddr OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1 | sysConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1.3 | siteEtherIpAddr | ACMIB |