All MIBs › ACMIB › oc3APSK1K2Tx
oc3APSK1K2Tx
Module: ACMIB
OID (symbolic): ACMIB::oc3APSK1K2Tx
OID (numeric): 1.3.6.1.4.1.1751.2.18.15.27
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Tx K1/K2 followed by hex value of K1, K2
What is oc3APSK1K2Tx?
This OID stores the K1 and K2 bytes (2 bytes total) that the equipment transmits on the OC3 line to signal protection switch commands to the far end. Engineers check this to ensure your equipment is sending the correct APS signals so the remote end coordinates the failover properly. For example, transmitted K1=0x01, K2=0x08 indicates your device is sending a specific protection command to the other side of the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.15.27 snmpwalk -v2c -c public <target> ACMIB::oc3APSK1K2Tx
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.15.27.1 snmpget -v2c -c public <target> ACMIB::oc3APSK1K2Tx.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::oc3APSK1K2Tx OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.15 | returnCode | ACMIB |
| 1.3.6.1.4.1.1751.2.18.15.27 | oc3APSK1K2Tx | ACMIB |