All MIBs › ACMIB › oc3APSK1K2Rx
oc3APSK1K2Rx
Module: ACMIB
OID (symbolic): ACMIB::oc3APSK1K2Rx
OID (numeric): 1.3.6.1.4.1.1751.2.18.15.26
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Rx K1/K2 followed by hex value of K1, K2
What is oc3APSK1K2Rx?
This OID holds the K1 and K2 bytes (2 bytes total) that the equipment received on the incoming OC3 line, which carry automatic protection switching commands and status from the far end. Network engineers monitor these hex values to verify that the remote equipment is sending the correct APS control signals. For example, received K1=0x04, K2=0x00 tells you what specific protection command the other end is requesting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.15.26 snmpwalk -v2c -c public <target> ACMIB::oc3APSK1K2Rx
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.15.26.1 snmpget -v2c -c public <target> ACMIB::oc3APSK1K2Rx.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::oc3APSK1K2Rx OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.15 | returnCode | ACMIB |
| 1.3.6.1.4.1.1751.2.18.15.26 | oc3APSK1K2Rx | ACMIB |