ACMIB :: oamLpbkAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBoamLpbkAction

oamLpbkAction

Module: ACMIB

OID (symbolic): ACMIB::oamLpbkAction

OID (numeric): 1.3.6.1.4.1.1751.2.18.22.3.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Test action to be performed. endLoopbackContinuously is not used.

What is oamLpbkAction?

This read-write integer specifies which test action to perform, such as starting or stopping the loopback diagnostics. A network engineer uses this to initiate OAM tests when troubleshooting connection quality or validating network paths. An example value is 'startLoopback', which instructs the system to begin sending test cells through the specified loopback location.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.22.3.1.6
snmpwalk -v2c -c public <target> ACMIB::oamLpbkAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.22.3.1.6.1
snmpget -v2c -c public <target> ACMIB::oamLpbkAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.22.3.1.6.1 i <value>

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::oamLpbkAction OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.22sysTestACMIB
1.3.6.1.4.1.1751.2.18.22.3oamLoopbackTableACMIB
1.3.6.1.4.1.1751.2.18.22.3.1oamLoopbackEntryACMIB
1.3.6.1.4.1.1751.2.18.22.3.1.6oamLpbkActionACMIB