msProtocol
Module: ACMIB
OID (symbolic): ACMIB::msProtocol
OID (numeric): 1.3.6.1.4.1.1751.2.18.2.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: protocol type for serial port
What is msProtocol?
This OID selects the protocol type (RS232, RS422, RS485, or proprietary) that the serial port will use for communication. Network managers configure this setting based on what type of external device is connected, as each protocol uses different signal levels and handshaking. Setting this to rs232 configures the port for standard DTE/DCE mode with proper signal levels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.4.1.4 snmpwalk -v2c -c public <target> ACMIB::msProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.4.1.4.1 snmpget -v2c -c public <target> ACMIB::msProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.2.4.1.4.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::msProtocol OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2 | equipConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.4 | msPortConfigTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.4.1 | msPortConfigEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.4.1.4 | msProtocol | ACMIB |