All MIBs › ACMIB › loopbackLocationID
loopbackLocationID
Module: ACMIB
OID (symbolic): ACMIB::loopbackLocationID
OID (numeric): 1.3.6.1.4.1.1751.2.18.1.45
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: ID of the ATM Node where the loopback is to occur.
What is loopbackLocationID?
This OID holds a 16-byte identifier specifying which ATM node should perform loopback testing and diagnostics. Engineers set this to direct loopback tests to a specific point in the ATM network for path validation and troubleshooting. For example, setting it to 'Node-001' would run diagnostic traffic through that particular node to verify connectivity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.45 snmpwalk -v2c -c public <target> ACMIB::loopbackLocationID
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.45.1 snmpget -v2c -c public <target> ACMIB::loopbackLocationID.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.1.45.1 s <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::loopbackLocationID OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1 | sysConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1.45 | loopbackLocationID | ACMIB |