All MIBs › ACMIB › keepAliveTimer
keepAliveTimer
Module: ACMIB
OID (symbolic): ACMIB::keepAliveTimer
OID (numeric): 1.3.6.1.4.1.1751.2.18.1.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: keep alive timer can be set inbetween 0 and 999999999
What is keepAliveTimer?
This OID stores a timer interval (0-999999999, typically in milliseconds) that controls how often the device sends keepalive messages to prevent idle connection timeout. Network engineers tune this when management connections are being closed by firewalls or NAT devices after periods of inactivity. Setting this to 30000 means the device sends a keepalive ping every 30 seconds to prove the connection is still alive.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.23 snmpwalk -v2c -c public <target> ACMIB::keepAliveTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.23.1 snmpget -v2c -c public <target> ACMIB::keepAliveTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.1.23.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::keepAliveTimer OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1 | sysConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1.23 | keepAliveTimer | ACMIB |