All MIBs › ACMIB › gr303PPSReasonCode
gr303PPSReasonCode
Module: ACMIB
OID (symbolic): ACMIB::gr303PPSReasonCode
OID (numeric): 1.3.6.1.4.1.1751.2.18.15.48
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: These reason codes are the result of GR303 Path Protection Switching (PPS) command issued by user
What is gr303PPSReasonCode?
This OID stores the reason code from a GR303 Path Protection Switching command issued by the operator. Engineers check this after manually triggering protection switching to see if the switch succeeded or encountered an error. For example, a code value of 'switchSucceeded' means the traffic switched to the backup path, while 'insufficientBandwidth' means switching failed due to resource constraints.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.15.48 snmpwalk -v2c -c public <target> ACMIB::gr303PPSReasonCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.15.48.1 snmpget -v2c -c public <target> ACMIB::gr303PPSReasonCode.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::gr303PPSReasonCode OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.15 | returnCode | ACMIB |
| 1.3.6.1.4.1.1751.2.18.15.48 | gr303PPSReasonCode | ACMIB |