ACMIB :: frUniLmiProtocol

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBfrUniLmiProtocol

frUniLmiProtocol

Module: ACMIB

OID (symbolic): ACMIB::frUniLmiProtocol

OID (numeric): 1.3.6.1.4.1.1751.2.18.5.6.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Lmi protocol to run

What is frUniLmiProtocol?

Stores which Line Management Interface (LMI) protocol variant to use on the Frame Relay interface (integer value). Network engineers must configure this to match their carrier's LMI type so the device can properly communicate with the Frame Relay switch for link status monitoring. Setting it to 'cisco' tells the router to use Cisco's proprietary LMI format; setting it to 'itu' uses the standard ITU format.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.5.6.1.7
snmpwalk -v2c -c public <target> ACMIB::frUniLmiProtocol

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.5.6.1.7.1
snmpget -v2c -c public <target> ACMIB::frUniLmiProtocol.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.5.6.1.7.1 i <value>

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::frUniLmiProtocol OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.5intfConfigACMIB
1.3.6.1.4.1.1751.2.18.5.6frUniConfigTableACMIB
1.3.6.1.4.1.1751.2.18.5.6.1frUniConfigEntryACMIB
1.3.6.1.4.1.1751.2.18.5.6.1.7frUniLmiProtocolACMIB