All MIBs › ACMIB › e3LineBuildOut
e3LineBuildOut
Module: ACMIB
OID (symbolic): ACMIB::e3LineBuildOut
OID (numeric): 1.3.6.1.4.1.1751.2.18.2.11.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: e3 line build out
What is e3LineBuildOut?
This read-only OID reports the line build-out setting of the E3 interface, which controls signal strength and equalization for the physical line. Network engineers check this to verify that the device is correctly matched to the cable distance and impedance of the installation. For example, if the OID shows 'dB10', it indicates the port is configured for a 10-decibel attenuation profile, appropriate for a specific cable run length.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.11.1.7 snmpwalk -v2c -c public <target> ACMIB::e3LineBuildOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.11.1.7.1 snmpget -v2c -c public <target> ACMIB::e3LineBuildOut.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::e3LineBuildOut OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2 | equipConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.11 | e3PortConfigTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.11.1 | e3PortConfigEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.11.1.7 | e3LineBuildOut | ACMIB |