e1LineType
Module: ACMIB
OID (symbolic): ACMIB::e1LineType
OID (numeric): 1.3.6.1.4.1.1751.2.18.2.12.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: E1 interface type. The rate of E1 is 2.048 Mbps
What is e1LineType?
This read-only OID identifies the type of E1 interface and confirms it operates at the standard 2.048 Mbps rate. Network engineers verify this during setup to ensure the port matches the service purchased from the carrier and is initialized correctly. For example, if this OID reports 'e1Primary', it confirms the interface is configured as a primary ISDN trunk suitable for connecting a PBX to the public network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.12.1.3 snmpwalk -v2c -c public <target> ACMIB::e1LineType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.12.1.3.1 snmpget -v2c -c public <target> ACMIB::e1LineType.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::e1LineType OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2 | equipConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.12 | e1PortConfigTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.12.1 | e1PortConfigEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.2.12.1.3 | e1LineType | ACMIB |