ACMIB :: dspReroutingFeature

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBdspReroutingFeature

dspReroutingFeature

Module: ACMIB

OID (symbolic): ACMIB::dspReroutingFeature

OID (numeric): 1.3.6.1.4.1.1751.2.18.1.109.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Dsp2 Rerouting Feature.This is used to enable or disable rerouting of connections when a dsp chip or card fails.

What is dspReroutingFeature?

This OID controls whether DSP chip rerouting is enabled or disabled on the system. Network engineers use this setting to determine if traffic automatically failsover to backup DSP chips when a DSP card fails. Setting it to enabled means a failed DSP chip will not interrupt service because connections reroute to the redundant chip.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.109.1
snmpwalk -v2c -c public <target> ACMIB::dspReroutingFeature

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.109.1.1
snmpget -v2c -c public <target> ACMIB::dspReroutingFeature.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.1.109.1.1 i <value>

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::dspReroutingFeature OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.1sysConfigACMIB
1.3.6.1.4.1.1751.2.18.1.109dspResourceFeatureConfigACMIB
1.3.6.1.4.1.1751.2.18.1.109.1dspReroutingFeatureACMIB