ACMIB :: dspOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBdspOperStatus

dspOperStatus

Module: ACMIB

OID (symbolic): ACMIB::dspOperStatus

OID (numeric): 1.3.6.1.4.1.1751.2.18.5.7.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service

What is dspOperStatus?

Reports the current operational state of the DSP interface: whether it is in-service (running) or out-of-service (inactive). Operators check this read-only value to verify that the DSP interface is actually running and not stuck in a failed state. A value of in-service confirms the DSP is processing data; out-of-service means it is disabled or has encountered a hardware fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.5.7.1.3
snmpwalk -v2c -c public <target> ACMIB::dspOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.5.7.1.3.1
snmpget -v2c -c public <target> ACMIB::dspOperStatus.1

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::dspOperStatus OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.5intfConfigACMIB
1.3.6.1.4.1.1751.2.18.5.7dspConfigTableACMIB
1.3.6.1.4.1.1751.2.18.5.7.1dspConfigEntryACMIB
1.3.6.1.4.1.1751.2.18.5.7.1.3dspOperStatusACMIB