ACMIB :: ds3LoopbackConfig

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBds3LoopbackConfig

ds3LoopbackConfig

Module: ACMIB

OID (symbolic): ACMIB::ds3LoopbackConfig

OID (numeric): 1.3.6.1.4.1.1751.2.18.2.3.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable represents the loopback configuration of the DS3 interface.

See above diagrams for explanations of loops.

What is ds3LoopbackConfig?

This OID enables different loopback modes on a DS3 interface for testing and diagnostics. Network engineers use loopback to isolate whether a problem is on the local side or the far end. Setting payload loopback loops returning traffic at the DSP level to test the entire signal path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.3.1.4
snmpwalk -v2c -c public <target> ACMIB::ds3LoopbackConfig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.3.1.4.1
snmpget -v2c -c public <target> ACMIB::ds3LoopbackConfig.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.2.3.1.4.1 i <value>

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::ds3LoopbackConfig OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.2equipConfigACMIB
1.3.6.1.4.1.1751.2.18.2.3ds3PortConfigTableACMIB
1.3.6.1.4.1.1751.2.18.2.3.1ds3PortConfigEntryACMIB
1.3.6.1.4.1.1751.2.18.2.3.1.4ds3LoopbackConfigACMIB