ACMIB :: ds3LineBuildOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACMIBds3LineBuildOut

ds3LineBuildOut

Module: ACMIB

OID (symbolic): ACMIB::ds3LineBuildOut

OID (numeric): 1.3.6.1.4.1.1751.2.18.2.3.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: ds3 line build out

What is ds3LineBuildOut?

This OID controls signal attenuation on the outgoing DS3 line to compensate for cable loss over the physical distance to the remote end. Engineers adjust this setting during installation to match their cable length and ensure strong, clean signals reach the far end without errors. Setting buildout to 225 feet tells the device to add appropriate attenuation for a physically distant connection.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.3.1.7
snmpwalk -v2c -c public <target> ACMIB::ds3LineBuildOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.2.3.1.7.1
snmpget -v2c -c public <target> ACMIB::ds3LineBuildOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.2.3.1.7.1 i <value>

Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::ds3LineBuildOut OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1751lucentACMIB
1.3.6.1.4.1.1751.2mibsACMIB
1.3.6.1.4.1.1751.2.18acMIBACMIB
1.3.6.1.4.1.1751.2.18.2equipConfigACMIB
1.3.6.1.4.1.1751.2.18.2.3ds3PortConfigTableACMIB
1.3.6.1.4.1.1751.2.18.2.3.1ds3PortConfigEntryACMIB
1.3.6.1.4.1.1751.2.18.2.3.1.7ds3LineBuildOutACMIB