All MIBs › ACMIB › consolePort2
consolePort2
Module: ACMIB
OID (symbolic): ACMIB::consolePort2
OID (numeric): 1.3.6.1.4.1.1751.2.18.1.90
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: port number on host where TRAP will be sent
What is consolePort2?
This OID defines the UDP port for the secondary console to receive SNMP trap messages, allowing the backup monitoring system to listen on a different port if needed. You configure this when your secondary monitoring server cannot use the same port as the primary due to system constraints. For example, setting it to 1162 lets a secondary monitoring station receive alerts on an alternate port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.90 snmpwalk -v2c -c public <target> ACMIB::consolePort2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.1.90.1 snmpget -v2c -c public <target> ACMIB::consolePort2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.1.90.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::consolePort2 OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1 | sysConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.1.90 | consolePort2 | ACMIB |