All MIBs › ACMIB › cellTestVpiB
cellTestVpiB
Module: ACMIB
OID (symbolic): ACMIB::cellTestVpiB
OID (numeric): 1.3.6.1.4.1.1751.2.18.18.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: VPI value for testing cell transfer to an I/O card. Valid range is a number between 0 and 4095. If the I/O card interface is not ATM, then this will always be zero.
What is cellTestVpiB?
This OID sets the Virtual Path Identifier (0–4095) that the test cells will use when targeting an ATM interface for loopback or throughput testing. If the interface is not ATM, this value remains zero and is ignored. For example, to test ATM cells on VPI 0, you would set this to 0; for VPI 10, you would set it to 10.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.18.2 snmpwalk -v2c -c public <target> ACMIB::cellTestVpiB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.18.2.1 snmpget -v2c -c public <target> ACMIB::cellTestVpiB.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.18.2.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::cellTestVpiB OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.18 | cellTest | ACMIB |
| 1.3.6.1.4.1.1751.2.18.18.2 | cellTestVpiB | ACMIB |