All MIBs › ACMIB › cellTestVUNIB
cellTestVUNIB
Module: ACMIB
OID (symbolic): ACMIB::cellTestVUNIB
OID (numeric): 1.3.6.1.4.1.1751.2.18.18.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: VUNI id for testing cell transfer to an I/O card. This field is valid only for ATM interface.
What is cellTestVUNIB?
This parameter specifies which virtual ATM interface or VUNI (0-255) should be subjected to a cell loopback test when you start a diagnostic. You configure this before running a cell test to specify exactly which logical port or circuit you want to diagnose. Setting this to 3 means that when you initiate a test, it will test the virtual interface associated with VUNI 3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.18.14 snmpwalk -v2c -c public <target> ACMIB::cellTestVUNIB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.18.14.1 snmpget -v2c -c public <target> ACMIB::cellTestVUNIB.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.18.14.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::cellTestVUNIB OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.18 | cellTest | ACMIB |
| 1.3.6.1.4.1.1751.2.18.18.14 | cellTestVUNIB | ACMIB |