All MIBs › ACMIB › atmSvcVccPeakCellRateA2B
atmSvcVccPeakCellRateA2B
Module: ACMIB
OID (symbolic): ACMIB::atmSvcVccPeakCellRateA2B
OID (numeric): 1.3.6.1.4.1.1751.2.18.6.3.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: peak rate - side A
What is atmSvcVccPeakCellRateA2B?
This OID stores the maximum number of cells per second that can be sent in the A-to-B direction (measured in units like cells/second or similar). The peak cell rate is the hard limit that the ATM switch will enforce; any traffic above this gets discarded. Network engineers set this based on the bandwidth contract with their carrier or internal SLA requirements.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.6.3.1.10 snmpwalk -v2c -c public <target> ACMIB::atmSvcVccPeakCellRateA2B
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.6.3.1.10.1 snmpget -v2c -c public <target> ACMIB::atmSvcVccPeakCellRateA2B.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::atmSvcVccPeakCellRateA2B OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6 | connectionConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.3 | atmSvcVccTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.3.1 | atmSvcVccEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.3.1.10 | atmSvcVccPeakCellRateA2B | ACMIB |