All MIBs › ACMIB › atmPvcVccOamStatusB
atmPvcVccOamStatusB
Module: ACMIB
OID (symbolic): ACMIB::atmPvcVccOamStatusB
OID (numeric): 1.3.6.1.4.1.1751.2.18.6.1.1.34
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows.
What is atmPvcVccOamStatusB?
This OID configures the Operations, Administration, and Maintenance (OAM) cell monitoring mode for side B of the connection, specifying whether the side acts as an end-point or segment-point for OAM flows. A network engineer enables OAM on side B to monitor connection health and enable fast failure detection at that endpoint. For example, setting this to End-Pt mode allows side B to generate and respond to OAM loopback requests, enabling the network operator to verify that side B can communicate with side A.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.6.1.1.34 snmpwalk -v2c -c public <target> ACMIB::atmPvcVccOamStatusB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.6.1.1.34.1 snmpget -v2c -c public <target> ACMIB::atmPvcVccOamStatusB.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1751.2.18.6.1.1.34.1 i <value>
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::atmPvcVccOamStatusB OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6 | connectionConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.1 | atmPvcVccTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.1.1 | atmPvcVccEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.1.1.34 | atmPvcVccOamStatusB | ACMIB |