All MIBs › ACMIB › atmPvcVccConnectionStatus
atmPvcVccConnectionStatus
Module: ACMIB
OID (symbolic): ACMIB::atmPvcVccConnectionStatus
OID (numeric): 1.3.6.1.4.1.1751.2.18.6.1.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service.
The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated.
InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service.
If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority.
What is atmPvcVccConnectionStatus?
This read-only OID reports whether the ATM connection is currently active, inactive, or in a special state based on the status of the interfaces it uses. A network engineer monitors this to diagnose whether a circuit is truly up and passing traffic or blocked by an interface problem. For example, a value of Active means all line cards and interfaces supporting this connection are operational, while Inactive indicates one of the endpoint interfaces is down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.6.1.1.25 snmpwalk -v2c -c public <target> ACMIB::atmPvcVccConnectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1751.2.18.6.1.1.25.1 snmpget -v2c -c public <target> ACMIB::atmPvcVccConnectionStatus.1
Start monitoring Lucent/Nortel Access Concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACMIB::atmPvcVccConnectionStatus OID value, configure state conditions and alerts, and monitor any Lucent/Nortel Access Concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1751 | lucent | ACMIB |
| 1.3.6.1.4.1.1751.2 | mibs | ACMIB |
| 1.3.6.1.4.1.1751.2.18 | acMIB | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6 | connectionConfig | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.1 | atmPvcVccTable | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.1.1 | atmPvcVccEntry | ACMIB |
| 1.3.6.1.4.1.1751.2.18.6.1.1.25 | atmPvcVccConnectionStatus | ACMIB |