All MIBs › ACC-MIB › accX25SwitchExtRtIfOut
accX25SwitchExtRtIfOut
Module: ACC-MIB
OID (symbolic): ACC-MIB::accX25SwitchExtRtIfOut
OID (numeric): 1.3.6.1.4.1.5.1.1.17.8.8.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface to which the call will be switched. This column is only significant when the disposition is 'switch'.
What is accX25SwitchExtRtIfOut?
This OID stores an integer that identifies which X.25 interface an incoming call should be switched to by referencing the system's interface table. Network engineers configure this when setting up call-switching rules to direct X.25 traffic to the correct outbound link. For example, a value of 3 means the switched call will use interface number 3 as its output path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.6 snmpwalk -v2c -c public <target> ACC-MIB::accX25SwitchExtRtIfOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.6.1 snmpget -v2c -c public <target> ACC-MIB::accX25SwitchExtRtIfOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8 | accX25Switch | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.8 | accX25SwitchExtRtTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.8.1 | accX25SwitchExtRtEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.6 | accX25SwitchExtRtIfOut | ACC-MIB |