ACC-MIB :: accX25SwitchExtRtIfIn

MIB Reference — IPNetwork Monitor

All MIBsACC-MIBaccX25SwitchExtRtIfIn

accX25SwitchExtRtIfIn

Module: ACC-MIB

OID (symbolic): ACC-MIB::accX25SwitchExtRtIfIn

OID (numeric): 1.3.6.1.4.1.5.1.1.17.8.8.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request. This column must match the interface that the call is received on before a match can be made. A value of zero will match calls received from any interface.

What is accX25SwitchExtRtIfIn?

This integer specifies which physical interface should receive incoming X.25 calls for this routing rule; a value of 0 matches calls from any interface. Set this when configuring X.25 call routing to restrict inbound calls to a specific port (like interface 2 for your primary line). For example, a value of 2 means only calls arriving on interface 2 will be considered for this routing rule.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.2
snmpwalk -v2c -c public <target> ACC-MIB::accX25SwitchExtRtIfIn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.2.1
snmpget -v2c -c public <target> ACC-MIB::accX25SwitchExtRtIfIn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.2.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.17accX25ACC-MIB
1.3.6.1.4.1.5.1.1.17.8accX25SwitchACC-MIB
1.3.6.1.4.1.5.1.1.17.8.8accX25SwitchExtRtTableACC-MIB
1.3.6.1.4.1.5.1.1.17.8.8.1accX25SwitchExtRtEntryACC-MIB
1.3.6.1.4.1.5.1.1.17.8.8.1.2accX25SwitchExtRtIfInACC-MIB