All MIBs › ACC-MIB › accX25SwitchExtRtAddr
accX25SwitchExtRtAddr
Module: ACC-MIB
OID (symbolic): ACC-MIB::accX25SwitchExtRtAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.17.8.8.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
A character string which defines the matching pattern for the incoming called X.121 addresses.
What is accX25SwitchExtRtAddr?
This string pattern defines which X.121 addresses (the X.25 dialing scheme) will be matched by this routing entry. You configure this when setting up call routing to match specific destination addresses or patterns, such as '31415*' to catch all calls to the 31415 area. A value of '123456' means this rule applies only to incoming calls destined for the exact X.121 address 123456.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.3 snmpwalk -v2c -c public <target> ACC-MIB::accX25SwitchExtRtAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.3.1 snmpget -v2c -c public <target> ACC-MIB::accX25SwitchExtRtAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.8.8.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8 | accX25Switch | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.8 | accX25SwitchExtRtTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.8.1 | accX25SwitchExtRtEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.3 | accX25SwitchExtRtAddr | ACC-MIB |