All MIBs › ACC-MIB › accX25SwitchAddrTransDir
accX25SwitchAddrTransDir
Module: ACC-MIB
OID (symbolic): ACC-MIB::accX25SwitchAddrTransDir
OID (numeric): 1.3.6.1.4.1.5.1.1.17.8.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
An Integer that identifies whether this entry applies to inbound or to outbound switched X.25 calls.
What is accX25SwitchAddrTransDir?
This OID is a read-write integer enumeration that specifies whether the address translation rule applies to inbound calls, outbound calls, or both. Network engineers set this to create different translation policies for traffic arriving on the device versus traffic being sent out. For example, a value of 1 might mean the rule applies to inbound calls while a value of 2 applies to outbound calls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.6.1.2 snmpwalk -v2c -c public <target> ACC-MIB::accX25SwitchAddrTransDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.6.1.2.1 snmpget -v2c -c public <target> ACC-MIB::accX25SwitchAddrTransDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.8.6.1.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8 | accX25Switch | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.6 | accX25SwitchAddrTransTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.6.1 | accX25SwitchAddrTransEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.2 | accX25SwitchAddrTransDir | ACC-MIB |