All MIBs › ACC-MIB › accX25SvcLimit
accX25SvcLimit
Module: ACC-MIB
OID (symbolic): ACC-MIB::accX25SvcLimit
OID (numeric): 1.3.6.1.4.1.5.1.1.17.3.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Maximum number of switched virtual circuits that IP can use. The value must not exceed the total number of logical channels available on this trunk.
What is accX25SvcLimit?
This integer caps the total number of switched virtual circuits that the IP layer on this device can create and maintain across all destinations. Network engineers configure this to balance the load and prevent IP from exhausting all available X.25 resources, leaving capacity for other protocols. If the total port supports 100 circuits, you might set this to 80 to reserve 20 for other uses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.3.1.13 snmpwalk -v2c -c public <target> ACC-MIB::accX25SvcLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.3.1.13.1 snmpget -v2c -c public <target> ACC-MIB::accX25SvcLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.3.1.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3 | accX25PortParmTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3.1 | accX25PortParmEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3.1.13 | accX25SvcLimit | ACC-MIB |