All MIBs › ACC-MIB › accX25PktSize
accX25PktSize
Module: ACC-MIB
OID (symbolic): ACC-MIB::accX25PktSize
OID (numeric): 1.3.6.1.4.1.5.1.1.17.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
specifies default data packet size for this port.
What is accX25PktSize?
This integer specifies the default maximum size in bytes of X.25 data packets sent out on this port. You'd adjust this based on the carrier's X.25 service specifications and to optimize throughput for your traffic type—larger packets mean fewer overhead but worse latency if one is lost. A typical setting might be 256 or 512 bytes, depending on what your X.25 provider supports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.3.1.3 snmpwalk -v2c -c public <target> ACC-MIB::accX25PktSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.3.1.3.1 snmpget -v2c -c public <target> ACC-MIB::accX25PktSize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.3.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3 | accX25PortParmTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3.1 | accX25PortParmEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3.1.3 | accX25PktSize | ACC-MIB |