All MIBs › ACC-MIB › accX25IdleMax
accX25IdleMax
Module: ACC-MIB
OID (symbolic): ACC-MIB::accX25IdleMax
OID (numeric): 1.3.6.1.4.1.5.1.1.17.3.1.10
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description:
maximum idle time for closing circuits; a circuit will be cleared when its idle time exceeds this value.
What is accX25IdleMax?
This TimeTicks value sets the maximum idle time before the device forcibly closes an idle X.25 virtual circuit to conserve bandwidth and carrier charges. You use this to balance responsiveness with cost—shorter timeouts save money but force reconnections more often. A value of 36000 means the circuit will definitely be dropped if no data moves for 360 seconds (6 minutes).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.3.1.10 snmpwalk -v2c -c public <target> ACC-MIB::accX25IdleMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.3.1.10.1 snmpget -v2c -c public <target> ACC-MIB::accX25IdleMax.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.3.1.10.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3 | accX25PortParmTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3.1 | accX25PortParmEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.3.1.10 | accX25IdleMax | ACC-MIB |