ACC-MIB :: accSrRingTblPortIndex

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-MIBaccSrRingTblPortIndex

accSrRingTblPortIndex

Module: ACC-MIB

OID (symbolic): ACC-MIB::accSrRingTblPortIndex

OID (numeric): 1.3.6.1.4.1.5.1.1.25.12.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The SR bridge port used to forward packets on the Virtual Ring.

What is accSrRingTblPortIndex?

This OID identifies which physical port on the Source Route bridge handles Virtual Ring traffic for a particular ring. Network engineers configure this to control which port is used when forwarding frames to remote Token Rings. For example, a value of 2 means Virtual Ring packets use port 2 on the SR bridge.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.12.1.3
snmpwalk -v2c -c public <target> ACC-MIB::accSrRingTblPortIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.12.1.3.1
snmpget -v2c -c public <target> ACC-MIB::accSrRingTblPortIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.25.12.1.3.1 i <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accSrRingTblPortIndex OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.25accSrACC-MIB
1.3.6.1.4.1.5.1.1.25.12accSrRingTableACC-MIB
1.3.6.1.4.1.5.1.1.25.12.1accSrRingEntryACC-MIB
1.3.6.1.4.1.5.1.1.25.12.1.3accSrRingTblPortIndexACC-MIB