All MIBs › ACC-MIB › accSrPortX25idleTime
accSrPortX25idleTime
Module: ACC-MIB
OID (symbolic): ACC-MIB::accSrPortX25idleTime
OID (numeric): 1.3.6.1.4.1.5.1.1.25.10.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
What is accSrPortX25idleTime?
This sets the maximum idle time in seconds before the X.25 connection is automatically disconnected by the device. Network admins adjust this to balance WAN connectivity costs (paying per call) against call setup overhead. A value of 900 means the connection automatically closes after 15 minutes with no data traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.10.1.4 snmpwalk -v2c -c public <target> ACC-MIB::accSrPortX25idleTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.10.1.4.1 snmpget -v2c -c public <target> ACC-MIB::accSrPortX25idleTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.25.10.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accSrPortX25idleTime.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25 | accSr | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.10 | accSrPortX25Table | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.10.1 | accSrPortX25Entry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.10.1.4 | accSrPortX25idleTime | ACC-MIB |