All MIBs › ACC-MIB › accSrFiltIIEntPort
accSrFiltIIEntPort
Module: ACC-MIB
OID (symbolic): ACC-MIB::accSrFiltIIEntPort
OID (numeric): 1.3.6.1.4.1.5.1.1.25.13.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
In all cases, the destination port of the received frame.
What is accSrFiltIIEntPort?
This OID specifies the output port where filtered frames should be sent when the disposition is set to forward. Network engineers configure this to direct filtered traffic to the correct physical port on the bridge. For example, a value of 3 sends all matching frames out through port 3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.13.1.4 snmpwalk -v2c -c public <target> ACC-MIB::accSrFiltIIEntPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.13.1.4.1 snmpget -v2c -c public <target> ACC-MIB::accSrFiltIIEntPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.25.13.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25 | accSr | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.13 | accSrFiltIITable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.13.1 | accSrFiltIIEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.13.1.4 | accSrFiltIIEntPort | ACC-MIB |