All MIBs › ACC-MIB › accSrFiltIIEntDstMacAddrMask
accSrFiltIIEntDstMacAddrMask
Module: ACC-MIB
OID (symbolic): ACC-MIB::accSrFiltIIEntDstMacAddrMask
OID (numeric): 1.3.6.1.4.1.5.1.1.25.13.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
Destination MAC Address Mask for the Filtering entry. The mask is ANDed with the Destination address to determine that part of the MAC address which is used in the filtering decision.
What is accSrFiltIIEntDstMacAddrMask?
This OID stores a 6-byte bitmask that is applied to destination MAC addresses during bridge filtering. A network engineer uses this mask to specify which bits of the destination MAC address matter in the filtering decision. For example, a mask of 0xFFFFFFFFFFFF (all ones) means every bit of the destination address is checked, while 0xFFFFFF000000 means only the first three bytes matter.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.13.1.7 snmpwalk -v2c -c public <target> ACC-MIB::accSrFiltIIEntDstMacAddrMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.25.13.1.7.1 snmpget -v2c -c public <target> ACC-MIB::accSrFiltIIEntDstMacAddrMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.25.13.1.7.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25 | accSr | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.13 | accSrFiltIITable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.13.1 | accSrFiltIIEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.25.13.1.7 | accSrFiltIIEntDstMacAddrMask | ACC-MIB |