ACC-MIB :: accReload

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-MIBaccReload

accReload

Module: ACC-MIB

OID (symbolic): ACC-MIB::accReload

OID (numeric): 1.3.6.1.4.1.5.1.1.1.7

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-write

Description: Time until system reload shall occur. Upon expiry of the timer, the system will load and execute a new image of the application code. The load file will come from diskette, local EPROM, or over the network, depending on the configuration of the unit.

What is accReload?

Stores a countdown timer (in centiseconds or 1/100th second units) that triggers a system reload when it expires. Engineers use this to schedule a controlled reboot of the device remotely without manually powering it down or interrupting service unnecessarily. A value of 360000 means the system will reload in 3600 seconds (1 hour) from when the value was set.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.7
snmpwalk -v2c -c public <target> ACC-MIB::accReload

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.7.1
snmpget -v2c -c public <target> ACC-MIB::accReload.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.1.7.1 i <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accReload OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.1accSystemACC-MIB
1.3.6.1.4.1.5.1.1.1.7accReloadACC-MIB