All MIBs › ACC-MIB › accPppLinkRemoteToLocalAC
accPppLinkRemoteToLocalAC
Module: ACC-MIB
OID (symbolic): ACC-MIB::accPppLinkRemoteToLocalAC
OID (numeric): 1.3.6.1.4.1.5.1.1.32.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
What is accPppLinkRemoteToLocalAC?
This flag shows whether the remote device is using Address/Control field compression for frames sent to us. Network engineers verify this matches the LocalToRemote setting to ensure consistent compression on both directions of the link. For example, if RemoteToLocal is 0 but LocalToRemote is 1, incoming frames will not be compressed even though outgoing frames are, wasting optimization potential.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.32.1.1.14 snmpwalk -v2c -c public <target> ACC-MIB::accPppLinkRemoteToLocalAC
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.32.1.1.14.1 snmpget -v2c -c public <target> ACC-MIB::accPppLinkRemoteToLocalAC.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32 | accPpp | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32.1 | accPppLinkTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32.1.1 | accPppLinkEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32.1.1.14 | accPppLinkRemoteToLocalAC | ACC-MIB |