All MIBs › ACC-MIB › accPppLcpRestartTimer
accPppLcpRestartTimer
Module: ACC-MIB
OID (symbolic): ACC-MIB::accPppLcpRestartTimer
OID (numeric): 1.3.6.1.4.1.5.1.1.32.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
What is accPppLcpRestartTimer?
This OID specifies the timeout in seconds (1-3600) that your device waits between sending a request and expecting a reply from the remote PPP endpoint. If no reply arrives within this time, the device will retry the request. You adjust this on high-latency links (satellites, WAN circuits) where round-trip time exceeds the default, preventing the device from giving up too quickly and treating a slow-but-working link as failed. For example, setting this to 60 seconds instead of the default 3 means you're allowing a full minute for the remote device to acknowledge an LCP configuration request.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.32.2.1.7 snmpwalk -v2c -c public <target> ACC-MIB::accPppLcpRestartTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.32.2.1.7.1 snmpget -v2c -c public <target> ACC-MIB::accPppLcpRestartTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.32.2.1.7.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32 | accPpp | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32.2 | accPppLcpConfigTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32.2.1 | accPppLcpConfigEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.32.2.1.7 | accPppLcpRestartTimer | ACC-MIB |