ACC-MIB :: accPppIpcpConfigStatus

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-MIBaccPppIpcpConfigStatus

accPppIpcpConfigStatus

Module: ACC-MIB

OID (symbolic): ACC-MIB::accPppIpcpConfigStatus

OID (numeric): 1.3.6.1.4.1.5.1.1.32.6.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If enabled(2) then the local node will allow IP traffic to flow across the link. If disabled(1) then IP traffic will not be allowed to flow across the link. Setting this object to the value disabled(1) has the effect of invalidating the corresponding entry in the accPppIpcpConfigTable object. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use.

What is accPppIpcpConfigStatus?

This read-write OID controls whether IP traffic is allowed to flow across the PPP link (enabled means traffic flows, disabled means it is blocked). Network engineers use this setting to quickly enable or disable all IP service on a PPP interface without deleting the configuration. Setting this to disabled(1) immediately stops all IP packets on that PPP link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.32.6.1.3
snmpwalk -v2c -c public <target> ACC-MIB::accPppIpcpConfigStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.32.6.1.3.1
snmpget -v2c -c public <target> ACC-MIB::accPppIpcpConfigStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.32.6.1.3.1 i <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accPppIpcpConfigStatus OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.32accPppACC-MIB
1.3.6.1.4.1.5.1.1.32.6accPppIpcpConfigTableACC-MIB
1.3.6.1.4.1.5.1.1.32.6.1accPppIpcpConfigEntryACC-MIB
1.3.6.1.4.1.5.1.1.32.6.1.3accPppIpcpConfigStatusACC-MIB