All MIBs › ACC-MIB › accLapbT1Timer
accLapbT1Timer
Module: ACC-MIB
OID (symbolic): ACC-MIB::accLapbT1Timer
OID (numeric): 1.3.6.1.4.1.5.1.1.7.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
T1 timer value (in milliseconds) for this interface.
What is accLapbT1Timer?
This configurable timeout value in milliseconds (1-32000 ms) controls how long LAPB waits for acknowledgment of a sent frame before attempting retransmission. Engineers tune this based on link latency and stability—too low causes unnecessary retransmissions, too high causes long delays. A value of 2000 sets the timeout to 2 seconds, appropriate for a stable WAN link where round-trip delay is under 1 second.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.3 snmpwalk -v2c -c public <target> ACC-MIB::accLapbT1Timer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.3.1 snmpget -v2c -c public <target> ACC-MIB::accLapbT1Timer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.7.2.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.7 | accLapb | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2 | accLapbParmTable | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2.1 | accLapbParmEntry | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2.1.3 | accLapbT1Timer | ACC-MIB |