All MIBs › ACC-MIB › accIsdnTestIfIndex
accIsdnTestIfIndex
Module: ACC-MIB
OID (symbolic): ACC-MIB::accIsdnTestIfIndex
OID (numeric): 1.3.6.1.4.1.5.1.1.36.5.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The interface index for the physical port from which a call will be made.
What is accIsdnTestIfIndex?
This read-write integer specifies which physical ISDN port index the gateway should use when initiating a test call. Administrators configure this before running ISDN connectivity tests to direct the test through a specific interface. Setting this to 2 tells the device to use ISDN interface 2 (perhaps your primary T1) for the next test call.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.36.5.1 snmpwalk -v2c -c public <target> ACC-MIB::accIsdnTestIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.36.5.1.1 snmpget -v2c -c public <target> ACC-MIB::accIsdnTestIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.36.5.1.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.36 | accIsdn | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.5 | accIsdnTest | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.5.1 | accIsdnTestIfIndex | ACC-MIB |