All MIBs › ACC-MIB › accIsdnSpidValue
accIsdnSpidValue
Module: ACC-MIB
OID (symbolic): ACC-MIB::accIsdnSpidValue
OID (numeric): 1.3.6.1.4.1.5.1.1.36.9.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
Value of SPID,Required for the terminal to be active on the S/T bus.
What is accIsdnSpidValue?
This read-write display string stores the Service Profile Identifier (SPID), which is required to activate the terminal on an ISDN S/T bus during service setup. You configure this during initial ISDN installation to register the device with the telephone company's ISDN service. A typical SPID value might be '551234567890101', which is assigned by your telecom carrier during ISDN service activation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.36.9.1.2 snmpwalk -v2c -c public <target> ACC-MIB::accIsdnSpidValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.36.9.1.2.1 snmpget -v2c -c public <target> ACC-MIB::accIsdnSpidValue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.36.9.1.2.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.36 | accIsdn | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.9 | accIsdnSpidTable | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.9.1 | accIsdnSpidEntry | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.9.1.2 | accIsdnSpidValue | ACC-MIB |