All MIBs › ACC-MIB › accIpxWdFilter
accIpxWdFilter
Module: ACC-MIB
OID (symbolic): ACC-MIB::accIpxWdFilter
OID (numeric): 1.3.6.1.4.1.5.1.1.22.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Switch to enable/disable a dial originate filter of the IPX file server watchdog (Keep Alive) packet.
What is accIpxWdFilter?
This setting controls whether the device filters out IPX file server watchdog packets (keep-alive messages that maintain active NetWare connections). Network engineers use this when watchdog traffic is consuming too much bandwidth on dial-up links or causing false disconnections on slow WAN circuits. Set to enabled to block watchdog packets and reduce traffic; set to disabled to allow them through so the server stays connected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.1.6 snmpwalk -v2c -c public <target> ACC-MIB::accIpxWdFilter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.1.6.1 snmpget -v2c -c public <target> ACC-MIB::accIpxWdFilter.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.1 | accIpxParms | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.1.6 | accIpxWdFilter | ACC-MIB |