All MIBs › ACC-MIB › accIpxRteFltrNetwork
accIpxRteFltrNetwork
Module: ACC-MIB
OID (symbolic): ACC-MIB::accIpxRteFltrNetwork
OID (numeric): 1.3.6.1.4.1.5.1.1.22.9.3.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
The Network Number the neighbor might advertise.
What is accIpxRteFltrNetwork?
This stores a 4-byte IPX network number that acts as a matching criterion in a route filter rule. Network engineers use this to selectively accept or block specific IPX networks that a neighbor is advertising, allowing fine-grained control over which routes enter the routing table. For example, you might filter on network 11223344 to only allow that network through while blocking others.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.9.3.1.2 snmpwalk -v2c -c public <target> ACC-MIB::accIpxRteFltrNetwork
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.9.3.1.2.1 snmpget -v2c -c public <target> ACC-MIB::accIpxRteFltrNetwork.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.9.3.1.2.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9 | accIpxRouteFilters | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9.3 | accIpxRteFltrTable | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9.3.1 | accIpxRteFltrEntry | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9.3.1.2 | accIpxRteFltrNetwork | ACC-MIB |